Creating Switching Programmes; Sample Mode - Endress+Hauser ASP Station 2000 Mode D'emploi

ASP Station 2000
Endress+Hauser
You can start the sampling programme either immediately by pressing the AUT key, or at a settable
time. You can specify the sampling programme stop as follows:
• Programme end: the unit stops sampling automatically when it has run through the set pro-
gramme.
• No: the unit runs through the programme in an infinite loop. Do not forget to empty the bottles.
• Time: the sampling programme stops at a settable time.
You can choose between continuous operation and operation at different intervals for the operating
mode.
• Day: operating time at two settable times per day.
• Week: operating time on three settable days per week.
• Interval: operating at specific time intervals.
Synchronisation
Menu structure:
Program 1
Name Program 1
Sample >
Distribution >
Start-Stop > -mode
Synchronisation >
Parallel sample >
â á
Esc <-'
Esc
Fig. 39: Synchronisation menu structure
You can use synchronisation to assign specific filling times to specific bottles. In this way you could
fill bottle 1 between 00:00 and 02:00 and bottle 2 between 02:00 and 04:00 etc. For this, you have
the following options:
• AUT-button: the sampling and bottle change times are not synchronised.
• Synchronisation TIME: sampling starts with the first bottle. The change to the next bottle is syn-
chronised. Example: a time of 2 hours was set for the bottle change and the point 00:00 was set
for the synchronisation. If the programme is started at 05.23, bottle 1 is filled. The system then
changes to bottle 2 at 06.00, to bottle 3 at 08.00 etc.
• Synchronisation TIME+BOT.: each bottle is allocated a specific filling time. Example: 00:00-
02:00: bottle 1; 02:00-04:00: bottle 2; 04:00-06:00: bottle 3, etc. For example is you start the
programme at 10:00, the unit will start filling bottle 6.
6.4.6

Creating switching programmes

Sample mode

Menu structure:
switch 1
Sample >
Distribution >
Parallel sample >
â
Esc <-'
Fig. 40: Sample mode menu structure
In the switching programmes, like in the main programmes, you can trigger sampling by time, quan-
tity, flow or an external signal.
Synchronisation
aut-button
: time time
time+bot.
â á
<-'
Sample
-mode : time
time : 00:15 ext. sig.
volume : 100ml flow
shots :
â á
Esc <-'
6 Commissioning
time
quantity
01 once
99