Description Of Device Functions - Endress+Hauser ASP Station 2000 Mode D'emploi

ASP Station 2000
Parameter
Info
Info
Basic settings
Name
Code
Date-time
Endress+Hauser
Programme stop options: "Reset" of parallel sampling
Menu structure:
Fig. 48: Parallel sampling reset menu structure
Define the programme stop "Reset" of parallel sampling as follows:
no
parall.end
prog. end
6.5

Description of device functions

The following table lists and describes all the setting parameters which you can read off and confi-
gure when configuring the device.
Menu level

Act. temp.:
Set
Info
Shows the current temperature in the sample compartment.
Status:
Shows the thermostatic status in the sample compartment.
Act. flow:
Shows the current flow rate value of a connected flowmeter.
Powerfail:
Shows the number and duration of power failures which occurred.
External stop:
Shows the number and duration of external stops.
Event:
Shows the number and duration of event signals.


Enter the required device name.
Set
Basic settings
Name


Enter the required user code.
Set
Basic settings
!
Code
If you no longer know the user code, enter the customer code 6051 to
unlock the controller configuration.


Date: Enter the current date.
Set
Time: Enter the local time.
Basic settings
Date-time Switch: Select the mode for switching between summer and winter
time.
Summer time: Date and value for switching to summer time.
Normal time: Date and value for switching to winter time.
Parallel sampling is stopped automatically when the last reserve bottle has been filled.
When the last reserve bottle is filled, parallel sampling continues automatically with the
first reserve bottle.
When the main programme is completed, parallel sampling continues automatically at
the first reserve bottle.
Setting options
Note!
6 Commissioning
Factory setting
ASP 2000
0000
With automatic
switch between
summer and win-
ter time
103