Parking Brake Adjustment - Yamaha FX10X Notice D'assemblage

PARKING BRAKE ADJUSTMENT

1. Remove:
• Shroud
• Right side cover
Refer to "SHROUD AND COVERS"
2. Measure:
• Parking brake cable distance a
Out of specification → Adjust.
Parking brake cable distance:
43.5 ~ 46.5 mm (1.713 ~ 1.831 in)
3. Adjust:
• Parking brake cable
Adjustment steps:
• Loosen the locknut 1.
• Turn the adjuster 2 in or out until the specified
distance a is obtained.
Turning in → Distance a is increased.
Turning out → Distance a is decreased.
• Tighten the locknut.
4. Measure:
• Brake pad clearance (b + c)
Out of specification → Adjust.
Brake pad clearance (b + c):
1.5 ~ 2.0 mm (0.059 ~ 0.079 in)
5. Adjust:
• Brake pad clearance
Adjustment steps:
• Loosen the locknut 1.
• Turn the adjuster 2 in or out to until the speci-
fied clearance between the brake pads 3 and
brake disc 4 is obtained.
• Tighten the locknut.
3-17