Storing And Retrieving Cycle Information; Retrieving Cycle Information Using The Touchscreen; Retrieving Cycle Information Using The Usb Data Back Up - SciCan AUTOCLAVE Statim 2000 G4 Manuel De L'utilisateur

6 Storing and Retrieving Cycle Information
The STATIM G4 has an internal Datalogger capable of storing all cycle data on every cycle,
whether successful or incomplete, for the lifetime of the unit. You can access this information
through the touchscreen, through the web portal, using a USB storage device or by attaching
a printer.
6.1 Retrieving Cycle Information Using the Touchscreen
1.
From the main menu, press the USB icon.
2.
The unit will record the last five successful cycles and the last five incomplete cycles.
If you select a cycle from the list, it will display cycle information in a format similar
to how it would be printed.
3.
Use the arrow keys to scroll through and read.
NOTE:
Regardless of whether you have a USB storage device attached to the unit or not,
you can always see the last five successful cycles and the last five incomplete cycles.
Use the STATIM G4 ConnectIM web portal to access all the cycle information stored on your
STATIM from your computer. To connect your STATIM to a network consult the separate
manual titled STATIM 2000/5000 G4 – ConnectIM User Guide.
6.2 Retrieving Cycle Information Using the USB Data Back Up
The USB storage device can be used to transfer cycle information stored in the unit
to a computer. Best practice suggests this should be done once a week. To transfer data
using the USB port, follow these steps:
1.
Plug the USB storage device into the USB port.
2.
The STATIM keeps track of what data has already been transferred to
the USB storage device and will automatically load only new data.
3.
When the activity light on the provided USB storage device stops blinking or the USB
icon on the LCD turns from a flashing green to a solid grey, remove the USB storage
device and transfer the information to your computer.
mm/dd/yyyy
SELECT A CYCLE
NOTE:
If you select the USB storage device icon from the main menu, you will only be able
to view the last five complete cycles and the last five incomplete cycles. To view all the
cycles stored on the USB storage device, you must use your computer.
hh:mm:ss
Yyyy/mm/dd xxxxx OK
Yyyy/mm/dd xxxxx OK
Yyyy/mm/dd xxxxx OK
Yyyy/mm/dd xxxxx OK
Yyyy/mm/dd xxxxx OK
Yyyy/mm/dd xxxxx (CFxx)
Yyyy/mm/dd xxxxx (CFxx)
Yyyy/mm/dd xxxxx (CFxx)
Yyyy/mm/dd xxxxx (CFxx)
Yyyy/mm/dd xxxxx (CFxx)
Page 32