Printing Cycle Information; Connecting A Printer; Adjusting Your Print Settings; External Printers And Specifications - SciCan AUTOCLAVE Statim 2000 G4 Manuel De L'utilisateur

7 Printing Cycle Information
The STATIM G4 is equipped with an RS232 serial port to allow you to connect it
to an external printer. (For a list of recommended printers, see the table below.)
Connecting to a Printer
To connect the printer, follow these steps:
1.
Connect the external printer to the STATIM G4's RS232 port using the serial printer cable
supplier with your printer.
2.
Power on the printer.
3.
On the STATIM G4, select
4. Scroll to and select.
5.
Use to toggle to the Serial Printer option and select. Press to save and
move back to the Setup menu.

Adjusting your Print Settings

The STATIM G4 allows for several printer adjustments. You can access these settings from
the user setup menu (see instructions above). Use the table below or your printer's operator
manual to make the correct adjustments to your printer's ,
End of Line CR/LF

External Printers and Specifications

Suggested External
Printers by SciCan
Epson
TM-U220D(C31C515603)
Citizen
IDP-3110-40 RF 120B
Star Micro
SP212FD42-120
Star Micro
SP216FD41-120
Star Micro
SP512MD42-R
Printer Type
and . Printer User Char.
End Of Line CR/LF
CR/LF
CR
CR
CR/LF
CR/LF
Page 33
Baud Rate
Serial Port Bitrate
9600
9600
9600
9600
9600
Printer user ° char
248 [0xF8]
N/A
210 [0xd2]
210 [0xd2]
210 [0xd2]