3 Setting up your STATIM
3.12 Changing the Touchscreen Display Themes
Your STATIM G4 touchscreen themes (i.e., icons and background colours) can be changed
to one of the preset options or you can upload additional themes, as they become available
from SciCan, using the USB port. To change themes follow these steps:
1.
2. Scroll to and select.
3.
From here, you can either select for a menu of preloaded themes or
Upgrade Theme
4.
In the screen, use to scroll through your available options.
As you scroll, each theme will display on the touchscreen. Press to select your
theme and return to the Setup menu.
5.
To upgrade a theme available from SciCan, download the theme onto your computer's
desktop and save the files onto a portable USB storage device. Insert the device into
your STATIM's USB port and, from the UPGRADE THEME screen, press
UPGRADE icon.
Upgrade
5.1
The unit will load the files directly from the USB storage device. Do not remove the USB
storage device while files are loading (this could take as long as 10 minutes). When it is
complete, the screen will display the 'Done' message. This new theme will now be
accessible from your THEMES menu.
5.2
Press to select this theme and return to the Setup screen.
3.13 Adjusting the Screensaver Delay
To change the length of time before your inactive touchscreen activates the screensaver,
follow these steps:
1.
2. Scroll to and select.
3.
Use to scroll through your time options. When you have found the amount of
time you require, press it. Press to save and return to the Setup menu.
Themes
to access a new theme that can be loaded using the USB port.
Change Theme
Screensaver
Change Theme
Page 17