Adjusting The Screen Contrast; Turning The Button Sound On Or Off; Adjusting The Button Beep Volume; Connecting To A Network - SciCan AUTOCLAVE Statim 2000 G4 Manuel De L'utilisateur

3 Setting up your STATIM
3.14 Adjusting the Screen Contrast
The STATIM G4 touchscreens are calibrated for the lighting condition of most sterilization
centres. Should you need to adjust the contrast for your office, follow these steps:
1.
2. Scroll to and select.
3.
Use to scroll through your contrast options. When you have found the contrast
you require, press it. Press to save and return to the Setup menu.
3.15 Turning the Button Sound ON or OFF
The STATIM G4 is preset to beep when a button is pressed. If you would like to turn
the button sound off, follow these steps:
NOTE: Turning OFF the button sound does NOT turn off other alarms and cycle notification
beeps.
1.
2. Scroll to and select.
3.
Use to scroll through your ON or OFF options and select it by pressing it.
Press to save and move back to the Setup menu.
3.16 Adjusting the Button Beep Volume
If you would like to adjust the beep volume, follow these steps:
1.
2. Scroll to and select.
3.
Use to scroll through to scroll through the volume settings. Select the one
you want by pressing it. Press to save and move back to the Setup menu.
3.17 Connecting to a Network
The STATIM G4 has a 10/100Base-T Ethernet port located at the back of the unit.
To connect your STATIM to a network consult the separate manual titled
STATIM 2000/5000 G4 – Setting Up and Using Your Web Portal.
LCD Contrast
Beep ON/OFF
Beep Volume
Page 18