Levelling Your Unit - SciCan AUTOCLAVE Statim 2000 G4 Manuel De L'utilisateur

3 Setting up your STATIM
3.2 Levelling your Unit
When placing your unit on a counter top, ensure it is stable and that all four feet are securely
in contact with the counter surface. This will prevent the unit from moving freely. Next, use
the level indicator bubble function in the settings menu to adjust the three leveler feet so that
the unit drains properly. To access the level indicator bubble from the main screen, follow
these steps:
1.
2. Scroll to and select.
3. Adjust the leveler feet to move the bubble.
Position the bubble in the bottom right quadrant
of the target. This will ensure that the unit drains
properly. Press STOP to exit and return to
the cycle select menu. When the unit is properly
leveled, the bubble level will change from red
to green.
Level
Page 12