Activating The Hydrim M2 - SciCan HYDRIM M2 Mode D'emploi

5. Instructions for Use

5.4 Activating the Hydrim M2

Prior to activating the washer-disinfector, check that the water supply is on and follow
these steps:
1
Open the chemical door and ensure that a bottle of HIP Hydrim Cleaning Solution
has been installed.
2
Turn the
unit on.
5
Load instruments into the
baskets or cassettes, place
them in the machine and
close the door.
3
21:06 31/08/07
Touch the
screen
HYDRIM
to begin.
SHM2MR300
P1 Regular
P2 80 o C 10 min
P3 90 o C 5 min
Select the desired
cycle.
40
4
Press to unlock door.
6
P1 Regular
START
Press Start
7