Disclaimers - SciCan HYDRIM M2 Mode D'emploi

3. Disclaimers

Do not permit any person other than authorised personnel to service, maintain or
supply parts for your Hydrim M2. SciCan shall not be liable for incidental, special
or consequential damages caused by any maintenance or services performed on
the Hydrim M2 by unauthorised personnel, or for the use of equipment or parts
manufactured by a third party, including lost profits, any commercial loss, economic
loss, or loss arising from personal injury.
Never remove the covers of the unit and never insert objects through holes or
openings in the cabinetry. Doing so may damage the unit and/or pose a hazard to the
operator. If the unit is used in a manner other than that specified, the protection
provided by the equipment may be impaired. Avoid contact with eyes and mouth. Never
lean on the open door. The unit may tip forward causing injury.
Always turn the unit
routine maintenance to the unit.
The owner shall not allow any personnel other than the trained and authorised personnel
to operate the unit. For further information or questions about the Hydrim M2,
contact your authorised dealer or:
SciCan Ltd.
1440 Don Mills Road
Toronto ON M3B 3P9
CANADA
Phone: (416) 445-1600
Fax: (416) 445-2727
Toll free: 1-800-667-7733
SciCan Inc.
701 Technology Drive
Canonsburg PA 15317
USA
Phone: (724) 820-1600
Fax: (724) 820-1479
Toll free: 1-800-572-1211
SciCan Medtech
Alpenstrasse 16
6300 Zug, Switzerland
Tel: +41(0) 41-727-7027
Fax: +41(0) 41-727-7029
OFF
before adding softener salt, adding solutions or performing
SciCan GmbH
Kurzes Geländ 10
86156 Augsburg
Germany
Tel: +49-(0)821 56 74 56-0
Fax.: +49-(0)821 56 74 67-99
For all service and repair inquiries
EU +49- (0)821-56-74-56-20
International 1-416- 445-1600
Canada: 1-800-870-7777
United States: 1-800-572-1211
Email: techservice.ca@scican.com
34