SciCan HYDRIM M2 Mode D'emploi page 51

5. Instructions for Use
Printer Selection
Serial Printer
Default Serial
Baud Rate
9600
Default 9600
Set Regeneration
0
Default 0
LCD Contrast
50%
Default 50%
Setup Menu – Printer / Data Logger Selection
Printer selection allows the user to select either a default
serial printer or the SciCan Data Logger as the recording
medium for cycle information. See section 5.11 for more
information.
Setup Menu – Baud Rate
The Baud rate is a setting used in conjunction with the
Printer Selection. Baud Rate is a measure of how fast data is
moving through the serial connection. See section 5.11 for
more information.
Setup Menu – Set Regeneration
Set the salt regeneration according to the local water hardness.
Use the up and down arrows to change the value. The default
setting is 0 . See Installation Instructions for further information.
Setup Menu - LCD Contrast
The user can adjust the LCD contrast. Touch the up and down
arrows to select the desired contrast. The default is 50%.
Touch the back arrow to return to the previous menu.
49