Setup Menu - SciCan HYDRIM M2 Mode D'emploi

5. Instructions for Use

5.9 Setup Menu

To access the Setup Menu, proceed to the menu screen by turning the Hydrim OFF and
then ON. An i (information) will appear briefly at the bottom right hand corner.
21:06 31/08/07
HYDRIM
SHM2MR300
Setup
Unit No.
Language Selection
Date/Time
Setup
Set Beep Button
Printer Selection
Baud Rate
Menu
User
Technician
Setup
Setup
Reset Dryer Counter
Screen Saver
Temperature C/F
Setup
Set Regeneration
LCD Contrast
45
Touch the i to move to the Menu
screen and select Setup.
The Setup Menu consists of eleven
choices as shown. Using the
up and down arrows to move
through the choices, touch the
desired option to select it. For more
detail on each setup menu option,
refer to the following sections.