User Menu - SciCan HYDRIM M2 Mode D'emploi

5. Instructions for Use
21:06 31/08/07
HYDRIM
SHM2MR300
Menu
User
Technician
Setup
Select User.
Set Drying Time
P1 Regular
Total
30 min. 10 min.
Default 30min/10min

5.7 User Menu

To access the user menu, follow these steps:
Turn the Hydrim OFF and then ON. An i (information) will
appear briefly at the bottom right hand of screen.
Touch the i to move to the Menu screen.
The user menu consists
of three choices.
User Menu – Set Drying Time
High
The dryer can operate at high speed and low speed. High
speed drying time and total drying time (high plus low) can
be independently set for P1, P2 and P3.
Use the right arrow to move from total drying time to high
speed drying time. The field with the larger font can be
adjusted using the up and down arrows (0-40 minutes for
total drying time and 0-40 minutes for high speed drying
time). Touch default if you wish to return to the factory
default. Use the back arrow to return to the previous screen.
User Menu
Set Drying Time
Error History
Cycle Count
43