Cycle Description Chart - SciCan HYDRIM C51w Mode D'emploi

5. Instructions for Use

5.2 Cycle Description Chart

description
cold Prewash***
Wash
rinse
dry
Total Time
without drying
Water
consumption
* This cycle is not a wash cycle and is not suitable for processing instruments prior to
reuse. Always run a wash cycle following the rinse and hold cycle.
** Cycle times depend on the temperature of incoming water.
*** Cold prewash water temperatures as stated is for normal operations allowing units to
cool down between cycles for a minimum of 30 minutes.
Page 7
P1 – rinse and
Hold* cycle
Use to prevent soil
from drying on
instruments when
they will not be
washed within
one hour.
<30ºC / 86ºF
N/A
60ºC / 140ºF
N/A
**
8 minutes
6 L / 1.59 gallons
P2 – regular P3 – Heavy duty
cycle cycle
Use for moderately Use for heavily
soiled loose soiled instruments
instruments. and cassettes
<30ºC / 86ºF <30ºC / 86ºF
50ºC / 122ºF 50ºC / 122ºF
5 minutes 9 minutes
60ºC/ 140ºF 60ºC / 140ºF
1-15 min. 1-15 min.
(10 min. default) (10 min. default)
19 minutes 23 minutes
17L / 4.5 gallons 17L / 4.5 gallons