SciCan HYDRIM C51w Mode D'emploi page 20

5. Instructions for Use
Printer Selection
Serial Printer
Default Serial
Baud Rate
9600
Default 9600
Set Regeneration
0
Default 0
Page 18
Setup Menu – Printer Selection
Printer selection allows the user to select either a default
serial printer or the SciCan Data Logger as the recording
medium for cycle information. See section 5.11 for more
information.
Setup Menu – Baud Rate
The Baud rate is a setting used in conjunction with the
Printer Selection. Baud Rate is a measure of how fast data is
moving through the serial connection. See section 5.11 for
more information.
Setup Menu – Set Regeneration
Set the salt regeneration according to the local water hardness.
Use the up and down arrows to change the value. The default
setting is 0. See Installation Instructions for further information.