Lenze 8200 vector Instructions De Montage page 139

Code
No. Name
C0002* Parameter set
s
transfer using
the keypad
uSEr
(cont.)
L
The most important codes for commissioning
Possible settings
Lenze Selection
ð
Keypad
71 With function module Application−I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
11 With all other function modules
ð
Keypad
72 With function module Application−I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
12 With all other function modules
ð
Keypad
73 With function module Application−I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
13 With all other function modules
ð
Keypad
74 With function module Application−I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
14 With all other function modules
Controller
80 With function module Application−I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
20 With all other function modules
ð
Keypad
40 Only with function module INTERBUS,
PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
Function module
50 Only with function module INTERBUS,
PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
EDK82EV222 DE/EN/FR 10.1
PAR1 (+ FPAR1)
PAR2 (+ FPAR1)
PAR3 (+ FPAR1)
PAR4 (+ FPAR1)
ð
Keypad
Function module
ð
Keypad
Commissioning
IMPORTANT
Overwrite selected parameter set and,
if necessary, FPAR1 with the
corresponding keypad data
All available parameter sets (PAR1 ...
PAR4, and FPAR1) are copied to the
keypad
Overwrite the module−specific
parameter set FPAR1 only
Copy the module−specific parameter
set FPAR1 only
7
139