Lenze 8200 vector Instructions De Montage page 117

Menu structure
All parameters for controller setting or monitoring are saved in codes. The codes are
numbered and labelled in the documentation with a "C". Some codes store the parameters
in numbered subcodes", so that a clear parameter setting is ensured (e. g.: C0517 User
menu).
The codes are described in detail in the system manual of the drive controller.
For easy operation the codes are divided in two groups:
The menu user
l
– is active after every mains switching or keypad attachment during operation.
– contains all codes for a standard application with linear V/f characteristic control
(Lenze setting).
– can be modified as required under C0517.
The menu all
l
– contains all codes.
– shows a list of all codes in ascending order.
L
Using the keypad E82ZBC − Parameter setting
EDK82EV222 DE/EN/FR 10.1
Commissioning
7
117