Malfunctioning Feed Pump In A Closed Sysstem; Technical Data; Data On Type Plate - Kramp MPP Manuel D'utilisation

8.7 Leakage from the high-pressure side to the low-pressure side of the
system
PROBLEM
The system is contaminated to the extent
that safety valves, relief valves or other com-
ponents remain open.
8.8 Malfunctioning feed pump in a closed system
PROBLEM
Damaged pump, malfunctioning drive
mechanism, damaged or contaminated
valves, incorrect viscosity, contaminated
feed filter.
9.0

Technical data

In the plastic file included you will find:
1. Acquisition report for the hydraulic power pack
2. Drawing
10

Data on type plate

Kramp
Breukelaarweg 33
NL - 7051 DW
WORK PRESSURE
Varsseveld
. .
WWW KRAMP COM
T +31 (0)88 000 10 00
F +31 (0)88 000 10 88
Location of type plate: on the side of the tank
Never remove the type plate.
It is not allowed to copy and/or publish anything of this publication by means of print, photo copy, microfilm or in any other way whatsoever,
SOLUTION(S)
Disassemble, clean and assemble the valve in question; determine whether
it is necessary to fill the system with new oil or even to flush it.
SOLUTION(S)
Repair or replace the damaged pump, drive mechanism or valves; replace
the oil with a type that is appropriate for the conditions and compliant with
regulations; clean or replace the filter element. See chapter 4 for additional
information.
. .:
ART NO
. .:
WO NO
:
BAR
:
PUMP CC REV
/
:
DATE
without preceding written permission of Kramp Groep B.V..
UK
17