Blackmagic Design Desktop Video Manuel D'installation Et D'utilisation page 45

Final Cut Pro
You can use the A/V output option in Final Cut Pro to output your video through
Blackmagic Design video hardware. If you are using a Desktop Video device that supports
HDR, you can also view and edit HDR video with a wide color gamut on a compatible television
or monitor.
Final Cut Pro
Setting Up Final Cut Pro
1 Ensure you are running Final Cut Pro X 10.0.4 or later with the latest version of Mac OS.
2 Open Blackmagic Desktop Video Setup. Click on the 'video standard' drop down menu
and then set the same format that you will use in your Final Cut Pro project. For example,
2160p29.97. The format should be the same as the video format of your clips. The video
standard setting also determines the monitoring video output mode.
Set the 'output format' to match your Final Cut Pro project format.
3 Click on the 'pixel format' drop down menu and set it to match a format your TV or external
monitor will accept. For example, if you are working with a wide HDR color gamut, choose
'10-bit YUV 4:2:2' or '10-bit RGB 4:4:4' based on your monitor's compatibility requirements.
4 Click on the 'color gamut' drop down menu and set this to match the color gamut your
project is using. If you are working with a standard or high definition project with a standard
dynamic range, choose 'Rec. 601/Rec. 709'. If you are using a Desktop Video device that
supports HDR and you are editing a 4K or high dynamic range project, select 'Rec. 2020'.
For projects that are both 4K and high dynamic range, choose either 'Rec. 2020 HLG' or
'Rec. 2020 PQ'. This should also be a format your TV or monitor is capable of displaying.
Now that you have set your output display settings using Desktop Video Setup, you can create
a new project in Final Cut Pro.
To create a new project:
1 Launch Final Cut Pro. In the library properties, you will notice the default untitled standard
project name. Click on its corresponding 'modify' icon. Create a new library by going to the
file menu, then selecting new and library.
Using your Favorite 3rd Party Software 45