Blackmagic Design Desktop Video Manuel D'installation Et D'utilisation page 39

Setting Up a Blackmagic Design Project
1 Open Premiere Pro and click on 'new project'. Type in a name for the project and select a
storage location for it.
2 If your graphics card is supported by Premiere Pro CC's Mercury Playback Engine,
the renderer option will be available and you should switch it to Mercury Playback Engine
GPU acceleration.
3 In the 'capture format' drop down menu, select 'Blackmagic capture'. Click the 'settings'
[mac] or 'properties' [windows] button to set the video and audio capture settings. Select
the video standard and video format. Click 'ok' to return to the 'new project' window.
4 Click on the 'scratch disks' tab to set the locations for your captured video, captured audio,
video and audio previews. Click 'ok' and your new project will open.
5 Now check your default system audio is not set to Blackmagic Desktop Video.
On Mac OS, open 'system preferences', click on the 'sound' option and in the output tab,
make sure your Blackmagic device is not selected. In the input tab, select your microphone
input, making sure your Blackmagic product is not selected.
On Windows, go to the task bar and right click on the audio 'speaker' icon to open
the sound settings. Click on the 'playback' tab and set your PC to use the on board
sound hardware or a sound output device other than your Blackmagic Design hardware.
Click on the 'recording' tab and set the computer to use a recording device other than your
Blackmagic Design hardware.
6 Back in Adobe Premiere Pro, click on the 'preferences' menu and select 'audio hardware'.
Set your 'default output' to 'built-in output' using the dropdown menu. Under 'output
mapping', map output for 'Adobe desktop audio'.
When setting up Adobe Premiere Pro's audio hardware
preferences, make sure the default audio output and
output mapping settings are set to 'built-in output'.
Using your Favorite 3rd Party Software 39