Chopin CD1 Mode D'emploi page 33

Instruction manual 
02/2017
Laboratory Mill CD1
The equipment and its user's guide conform to the EEC directives.
■ Warnings
❏ Use of the equipment for other purposes than those anticipated
by the Chopin Technologies is strictly forbidden.
❏ Thoroughly follow the warnings and instructions given both in the
documentation and on the actual equipment.
■ Environment
❏ inside use,
❏ operating temperature: 10°C to 45°C,
❏ hygrometry: 10% to 90%,
❏ power voltage variations not exceeding ± 10% of the nominal
voltage,
❏ pollution grade (following EN 61010-2): 2,
❏ installation category for transient surges (following EN 61010-2):
II.
■ Characteristics
❏ 230/400 Vac three-phase 50 or 60 Hz (according to the device
configuration, consult the data plate.)
and
❏ 230 Vac mono-phase 50 or 60 Hz (according to the device config-
uration, consult the data plate.)
❏ Power consumption:
❏ Net weight:
❏ Dimensions (mm):
■ Electrical connection
❏ The electrical network must be fitted with a RDC (Residual Cur-
rent Device) of sensitivity  30 mA of AC class upstream the bench.
❏ The 2 Ph + Earth plug can only be plugged into a socket fitted
with a protection conductor.
■ Fuses
Fuse 5 x 20 F 2A 250V
■ Transport
Pack the equipment in its original packaging to fully protect it.
GB
for 230/400 V : 1360 W 
for 230 V : 70 W.
110 kg.
L 1100 x W 900 x H 900
33