Using The Iaqpoint Programming Menus - Honeywell IAQPoint2 Guide De Démarrage Rapide

Using the IAQPoint
Programming Menus

Using the IAQPoint Programming Menus

Access to the IAQPoint programming is
achieved through push buttons located on the
front of the device, below the LCD screen.
The right, or "Enter" button (identified by a
return symbol) opens access to programming
functions and validates selections. The left
and centre buttons (identified by Down and
Up arrows, respectively) scroll through main
programming screens and increase or
decrease values when in a specific programming screen.
• Press the Enter button to access the programming menus.
• Use the Up and Down buttons to navigate through the menu options
and press the Enter button to select the desired option.
• Use the Up and Down buttons to modify a setting and press the Enter
button to confirm the change.
Since programming is password protected, you must login to gain access
to the menus (the default password is VA). In the Password screen, the
first letter is underlined, which indicates that it can be modified.
• Press the Enter button to activate the login screen.
• Press the Up or Down button until the desired letter appears.
• Press the Enter button to validate the entry and move to the next
letter
• Press the Up or Down button until the desired letter appears
• Press the Enter button to validate the password and access the
menus.
18
Password
* AA *
IAQPoint User Manual