Erasing Unit Memory; Exiting The Programming Menu - Honeywell IAQPoint2 Guide De Démarrage Rapide

Programming Menu
Using the Menu

Erasing Unit Memory

This function enables the user to clear addresses from the unit's
memory. This is useful if, for reasons unknown, the 301AP display
panel experiences technical difficulties. Once the 301AP memory is
cleared, the 301C controller resets the AP memory and the display
should return to normal.
1. Press an arrow to scroll to the Menu ClearMem
option, press the Enter pushbutton to select.
2. The screen displays ClearMem All Adr. Press
the Enter pushbutton to select the option or use
the arrows to select the address to delete.
3. Press an arrow pushbutton to scroll to Yes or No
and press Enter to confirm. The display returns to
the Menu Set ADR. screen.
4. Press an arrow to scroll to the next desired option
or to the QUIT screen and press Enter to confirm the selection or
exit the programming menus.

Exiting the Programming Menu

Follow the steps below to exit the programming menu.
Press an arrow to scroll to the QUIT screen and press Enter to exit the
programming menus.
The LCD displays * WAIT * Re-init as the transmitter implements all the
changes that were made in the user's menu before returning to normal
operation.
20 301AP User Manual
Honeywell
Menu
ClearMem
ClearMem
All Adr.
All Adr
No?
512227
2/08