Honeywell IAQPoint2 Guide De Démarrage Rapide page 939

Surface Mount Installation
It is recommended that controllers be installed 5 feet (1.5 m) above the
floor, at approximate eye level.
Mark the holes as shown:
• Height markers 6 13/32" apart
• Width markers 10 9/16" apart
• Pre-drill 1/4" mounting holes as needed
• Securely mount the 96D using the appropriate screws
Wiring for the unit must be passed through the knock-outs provided at
the bottom of the unit.
M-511401
8/10
16 cm
"
5/16
6
96d User Manual
Honeywell
33.6 cm
1/4
13
Introduction
Installation Instructions
1.52 m
5.0 ft
11