Honeywell IAQPoint2 Guide De Démarrage Rapide page 968

Delays Menu
This option allows Before and After settings that will delay the activation
or deactivation of an action to be programmed.
Delays the action for the specified length of time. If the
Before
condition persists beyond this delay, the defined action is
executed.
The time to wait after an event has returned to normal before
After
returning action output to normal state. The after delay also
offers a Latch option, described below.
Before and After delays can be configured at either 30 or 45 seconds or
from 1 to 99 minutes, in one minute increments. Five dashes (-----)
indicates that no delay has been programmed.
• Use the keypad arrows to scroll to the desire option
• Press Enter to select the option
• Use the keypad arrows to scroll through the second or minute
settings
• Press Enter at the desired setting. The delay is set.
M-511401
8/10
3. Events
-Delays-
Before: 99min
After: 01min
96d User Manual
Honeywell
System Programming
001
Event Menu
41