Configuration; Accessing The Menus - Honeywell IAQPoint2 Guide De Démarrage Rapide

Accessing the Menus

The 301ADI is equipped with a 2 x 8 character LCD display screen
within its housing that allows you to configure the settings for the 16
analog inputs and the 8 digital inputs. Use the keypad arrows (Up,
Down, Esc, Enter) provided on the PCB to scroll through programming
options.
When you open the 301ADI housing (to access the display screen), the
LCD screen displays only the product name and the Modbus address.
This is displayed whenever the screen is idle. The programming
function is password protected, you must log a password to access this
function. The default password is VA.
• Press Enter once to display the password screen.
• When the password screen is first displayed, it shows
AA as the password, with the cursor under the first
letter.
• Use the Up or Down arrow buttons to change characters.
• When the first letter is correct, press Enter to move to the second
letter.
• Press Enter once more to validate the password.
Once the password has been validated, the screen
displays "*Menu* ConfigAI?", the first of three (3) main
menu options. Use the Up and Down buttons to scroll
through the options and Enter to select the desired one:
• Press the UP button once to move from the Config
AI screen to the Config DI screen (press DOWN to
return to the previous screen)
• Press the UP button again to move to the "Modbs
ID" screen
• Pressing ENTER at any screen opens a sub-menu
that allows you to either enable or disable an input or to change the
Modbus address.
510846
4/07

Configuration

301ADI User Manual
Honeywell
Configuration
Accessing the Menus
PASSWORD
AA
*MENU*
Cfg AI
*MENU*
Cfg DI
*MENU*
ModbsID
17