Detection Range And Alarm Levels; Status Display - Honeywell IAQPoint2 Guide De Démarrage Rapide

Detection Range and Alarm Levels

Gas Detected
CO Carbon monoxide
NO
Nitrogen dioxide
2
O
Oxygen
2
R-11 Refrigerant Q1
R-12 Refrigerant Q1
R-22 Refrigerant Q1
R-123 Refrigerant
R-125 Refrigerant Q1
R134A Refrigerant Q1
COMB Combustibles
A different alarm level setting can be programmed to meet the
requirements of a particular use.

Status Display

The SQN8x will display the status of each zone, starting with Zone 1
and ending with Zone 8. This display is on a continuous loop. However,
if a given zone is in alarm state, the system will display the status of that
zone intermittently between the displays of the other zones monitored
by the system.
For example, if Zone 2 is in alarm status, the system will display the
zones in the following order: Zone 1; Zone 2; Zone 3; Zone 2, Zone 4;
Zone 2, etc.
512226
2/08
Range
0-255 ppm
0-10.2 ppm
0-25.5% Vol. 19.5% Vol.
0-1,020 ppm
0-1,020 ppm
0-1,020 ppm
0-1,020 ppm
0-1,020 ppm
0-1,020 ppm
0-102% LEL
SQN8X User Manual
Honeywell
Detection Range and Alarm Levels
Alarm A Alarm B
25 ppm 200 ppm
0.72 ppm 2 ppm
22% Vol.
250 ppm 500 ppm
250 ppm 500 ppm
250 ppm 500 ppm
50 ppm 500 ppm
250 ppm 500 ppm
250 ppm 500 ppm
25% LEL 50% LEL
Programming
AlarmC
225 ppm
9 ppm
22.5% Vol.
900 ppm
900 ppm
900 ppm
900 ppm
900 ppm
900 ppm
90% LEL
19