Using The Iaqpoint; Programming Menus - Honeywell IAQPoint2 Guide De Démarrage Rapide

Programming Menus

When the IAQPoint is first powered up, it must go through a warm up
cycle, which could take as long as 15 minutes. During the warm up cycle,
the LCD screen displays the gas type and WARM-UP on the first line and
temperature and humidity readings (in real time) on the second line.
When the device is in normal mode, it will display the gas type and
concentration on line one and temperature and humidity readings (in real
time) on the second line.
The programming menus provide access to a variety of function screens.
Each selection within the menu leads to another screen, in sequence,
until you have reached the end and can Quit the programming functions.

Using the IAQPoint

CO
2
20
º
C
CO 1500 ppm
2
20
º
C
IAQPoint User Manual
WARM-UP
%
68 13
º F
RH
%
68 13
º
F RH
Using the IAQPoint
Programming Menus
17