Using The Menu - Honeywell 301AP Manuel De L'utilisateur

Programming Menu

Using the Menu

Using the Menu
Follow these steps to access and use the programming menu:
1. Press the Enter pushbutton to access the menu. The password
screen appears requesting the password.
2. The first letter in the password is underlined to
show that it can be changed. Press the up or
down arrow to scroll to the desired letter.
3. Press the Enter pushbutton to confirm the first
letter.
4. Use the arrows to scroll to the desired second letter.
5. Press the Enter pushbutton to confirm the
password. If it is correct, the following screen
appears.
Note: The default password is VA. If an incorrect
password is entered, the menu cannot be accessed and the unit
returns to normal operation mode.
511392
2/07
301AP User Manual
Honeywell
PASSWORD
VA
Menu
Set ADR.
17