Changing Silence Settings; Activating Key Beeps - Honeywell 301AP Manuel De L'utilisateur

Programming Menu
Using the Menu

Changing Silence Settings

The unit user interface contains a "Silence" pushbutton. This button is
only functional if the Silence setting has been activated for each option
using this menu.
1. Press an arrow to scroll to the Menu Silence
option and press Enter to select.
2. Silence Rel #1 appears on the screen. Press an
arrow to scroll to the desired relay number (or
Buzzer) and press Enter to select.
3. The screen now requests confirmation. Use the
arrows to scroll to the desired setting (Yes
activates the Silence pushbutton for the specified
relay or buzzer, No leaves the pushbutton
inactive) and press Enter to confirm the new setting.
4. Once the new value is accepted, the unit returns to the Silence Rel
#1 screen.
Repeat for other options.
Note: Selecting buzzer means that pressing the Silence key will turn off
the unit's audible alarm.
Selecting Rel #1, #2 or #3 means that pressing the Silence key
will deactivate a relay that was activated by an alarm.

Activating Key Beeps

This function activates the Beep function, which makes the unit emit a
beep whenever a pushbutton is pressed:
1. When the screen displays the Menu KeyBeep
option, press the Enter pushbutton to select.
2. Press an arrow pushbutton to scroll to Yes or No
and press Enter to set the new value. The display
returns to the Menu Set ADR. screen.
3. Press an arrow to scroll to the next desired option
or to the QUIT screen and press Enter to confirm the selection or
exit the programming menus.
511392
2/07
301AP User Manual
Honeywell
Menu
Silence
Silence
Rel #1
R1= Yes?
Menu
KeyBeep
KeyBeep
No?
19