Pushbutton Definitions - Honeywell IAQPoint2 Guide De Démarrage Rapide

Programming and Calibration
User Interface

Pushbutton Definitions

The 301EM has "pushbuttons" that serve as an interface to the unit's
programming functions. Below is a description for each button's function:
Key
28
Description
Used to exit the menus or cancel an input. Also used to
stop the alternating reading between the connected
sensors.
Used to scroll through the sensor data displays or through
menus or to change a specific value.
Serves as an "enter" key and is used to access a
programming field or to confirm a specific value.
Fan start switch (For B-52 or ASHRAE 15 programming).
See the Events table
Used to reset all outputs after system returns to normal
operating mode (linked to the Reset function in the Events
menu).
Turns off the buzzer and horns
301EM User Manual