Honeywell IAQPoint2 Guide De Démarrage Rapide page 960

Status Code
These screens display transmission or node status and sensor status
for the selected transmitter. This read-only information can assist
service personnel in troubleshooting.
The XNX and XCD gas detectors will report the warning or fault number
(iFaultWarnNumber) in hexidecimal on the third line. These transmitters
will also report the monitoring state (iMonitoringState) in the fourth line.
See the transmitter documentation for interpretation of fault numbers
and monitoring states.
Erase Current Tx
This function allows the configuration to be erased or the Tx address for
the displayed component to be changed.
Note: Selecting erase current Tx only erases the current device entry
Tx Info configuration. No other data is erased.
M-511401
8/10
Typical display for XNX or XCD
Typical display for other transmitters
1. Tx Info
erase current Tx
Change Tx Address
96d User Manual
Honeywell
System Programming
001
Tx Info Menu
33