Honeywell IAQPoint2 Guide De Démarrage Rapide page 515

System Programming
Wireless Network Menu
Options 1 through 29 are for information purposes only and cannot be
modified.
Options 16 through 21 are only displayed if the selected node has a
second parent (a parent is any other node to which a node may
connect to create a link to the controller).
Option 22 through 27 are only displayed if the node has a third parent.
Options 31 through 33 allow the Hibernate, Replace, or Remove nodes
to be selected:
Hibernate Places the node in hibernation (power down). This mode is
used for maintenance or to change the battery.
Replace Allows a node to be replaced by another without changing
the MAC address or node ID (enables a free node with a
different [or same] MAC address to be mapped to the current
node ID).
Remove Removes the node from the network and erases the node
data from the coordinator memory and from the 301C
database.
Option 34, Consolidate Route, allows the user to force the node to find
the best route to the controller using an alternate parent.
86 301C User Manual
Honeywell
M-510324
7/10