Description
The E
Point Remote Sensor provides continuous monitoring for one of
3
the following gases in ambient air: CO, H
hazards. Connected to an E
protection (second location, different gas type).
Safety Information
Users of the E
3
installation, operating and maintenance instructions, otherwise protection
provided by the monitor may be impaired. Read the following warnings
before using the monitor.
WARNING:
•
Install according to local electrical regulations and codes.
•
Installation should be performed by qualified personnel.
•
Do not paint over the sensor screen.
•
Ensure the sensor screen is free of dirt and debris.
•
Ensure the sensor screen is not covered.
!
•
Do not expose the monitor to electrical shock or continuous mechanical
shock.
•
Do not expose the sensor to high pressure water spray.
•
Do not use the monitor if it is damaged. Inspect the monitor before
use. Look for cracks, missing metals, or plastics. If the monitor is
damaged, contact Honeywell Analytics immediately.
•
The warranty will be voided if the customer or any unauthorized service
personnel attempts to repair the unit.
E
Point Standalone Gas Monitor User Manual
3
Remote Sensor
Point Standalone monitor, it provides dual
3
Point Remote Sensor should fully understand the
S, O
, NO
, and combustible
2
2
2
Remote Sensor
27