Honeywell IAQPoint2 Guide De Démarrage Rapide page 487

Config Menu
The second main screen in the Config menu allows a new user
password to be set and the slave port configuration to be modified.
The default password is 2967. Select Set User Password to change the
password:
• When the first digit blinks, change the value by using the up/down
keypad arrows to increase or decrease the number
• Use the left/right keypad arrows to move from one digit to the next.
• When the desired password has been set, press Enter to validate it
and exit the editing mode.
Note: Contact Honeywell technical support for help with lost passwords
at 1-800-563-2967.
58
6. Config
Set User Password
- 2967 -
Slave Port Cnfg
301C User Manual
Honeywell
M-510324
7/10