Publicité
Equipment safety precautions
CAUTION: Follow these safety precautions whenever installing,
operating, servicing, or maintaining the equipment described in this
CAUTION
manual.
Charging rail.
doors are closed. Shorting of the charging rails with either a watch or ring may
result in electrical shock.
Be careful when removing/replacing iBOTs.
iBOTs payload capacity, the iBOT was designed to be as light as possible. As
a consequence the iBOTs are not indestructible. Care should be taken when
removing or installing the iBOTs.
Do not remove the plastic, protective covers from the bottom of the
iBOTs.
These covers protect the iBOTs ultracapacitors and circuitry from
damage. The covers also protect the operator from harm if the ultracapacitors
should leak. For information on ultracapacitor safety, refer to
product information" on page
Keep loose objects away from any exposed, moving parts of the
machine.
The moving parts of the Mail Matrix, such as the conveyor, can
become jammed and/or damaged by foreign objects. Keep hands, hair, loose
clothing and jewelry away from the moving parts.
Do not attempt to clean the machine while it is running.
similar material) should never be used to clean moving parts such as belts or
rollers. The use of such material on moving mechanisms can result in damage
to the machine or severe personal injury. If a belt, roller, gate or similar part
needs to be cleaned, hand-crank the part during cleaning or clean it while
stationary.
Do not use flammable, high pressure, "canned air" to clean paper scraps
and dust from the machine.
chemicals, making them unsafe to use around powered equipment and other
sources of ignition.
Hands should be kept clear of the charging rails when the
43.
Air duster spray cans contain flammable
Mail Matrix Operator Manual
OPEX Corporation
In order to increase the
"Ultracapacitor
A cloth (or
41
Publicité
Chapitres
