Publicité
2. Once you have your run set up the way you want, decide whether or not to
use the Host PC as a Keying Station. If you have other KFI modules
installed and active, you can have the images of unrecognized mail sent to
those stations and just control the run from the Host PC. If you do choose to
use the Host PC as a Keying Station:
a. Press F12 on the keyboard to switch to the Keying Station application
on the Host PC. A miniature version of the Run screen will appear in the
lower right corner of the screen.
b. Enter your username and password into the appropriate fields and click
the Login button to log in to the Keying Station application.
3. If you are using the auto-feeder, load it with mail as described here. If not,
proceed to step 4:
62
Figure 43: Miniature Run screen
Mail Matrix Operator Manual
OPEX Corporation
Publicité
Chapitres
