Opex Mail Matrix Manuel De L'opérateur page 212

Setting up a job
Enabling the printer-labeler
The printer-labeler must be enabled in the job in order to print labels.
Supervisor-level and Manager-level operators can enable the printer-labeler
using the host software as follows:
1. Go to Setup > Parameters.
2. Under the Job tab, select the desired sort job, and then select Printer-
Labeler General Setup.
3. In the Label printing setup box, select the Enable button. If you are running
the printer-labeler for the first time and/or need to create a new label, click
106
Figure 88:
Mail Matrix Operator Manual
OPEX Corporation