Publicité
• An iBOT may have collided with a bin that has not been inserted properly,
and is jutting into the machine slightly. Check the next couple of bins below
the location of a jammed iBOT, on both sides of the machine, and ensure
that all the bins are inserted properly.
Use the red brake-release button on the iBOT to move the iBOT up and
down, and verify that it is moving smoothly without obstruction. If it is not
moving smoothly, the iBOT will need to be removed from the machine.
Click the Clear Jam button on the Run screen, and click Start to continue
running.
Clearing other iBOTs out of the way / Bringing them Home
In certain situations, it may be a good idea to bring all the non-jammed iBOTs
home. For example:
• It is difficult to reach the jammed iBOT due to other iBOTs being in the way.
• The jam looks complicated and may take a while to recover from, and
bringing the other iBOTs home would save them from running out of power
and being stranded.
156
Figure 136: iBOT collided with bin
Mail Matrix Operator Manual
OPEX Corporation
Publicité
Chapitres
