Publicité
iBOT Jammed or iBOT Collision jam or iBOT Stalled jam
Description
These jams are signaled when something is obstructing an
iBOT's path.
Resolution
Use the iBOTs status display (in the iBOTs tab in the Run
screen) to identify the location of the jammed iBOT, and find it in the machine.
There are several possible situations in which an iBOT may sense a collision.
Some of them are shown below.
• An iBOT may have collided with another iBOT, as shown below. If this
appears to be the case, use the iBOTs status display to verify that the
location of the two iBOTs in the display matches their true position in the
machine.
- If the locations do not match, identify which iBOT is not matched
correctly, and remove it from the machine. Follow the normal iBOT
removal procedure to accomplish this. Then click the Clear Jam button
on the Run screen, and click Start to continue running.
- If the location of both iBOTs is shown correctly in the display, go to the
iBOTs, and use the red brake-release button on one of the iBOTs to
move it at least six inches away from the other iBOT. Click the Clear
Jam button on the Run screen, and then click Start to continue running.
Figure 133: iBOT Collision
Mail Matrix Operator Manual
OPEX Corporation
153
Publicité
Chapitres
