Publicité
a. If a bin has been assigned for the mail piece, the iBOT will exit the
loading column and deliver the piece to the assigned bin.
b. If a bin has not been assigned, the iBOT will wait in the first delivery
column for its bin assignment. Once the destination has been assigned,
the iBOT will deliver the piece.
- When an iBOT is at the top of the loading column waiting to be
keyed and two iBOTs accumulate below with destinations, the iBOT
will exit the loading column then re-enter from below (recirculate).
- When two iBOTs are at the top of the loading column waiting to be
keyed and three iBOTs accumulate below with destinations, the
iBOTs will recirculate.
Note: If the iBOT does not receive a bin assignment, the piece will be
sent to the reject bin/tub when the job is stopped.
6. The iBOT carries the piece to the delivery bin, releases the piece to the bin,
and heads back to the loading column.
Mail Matrix Operator Manual
OPEX Corporation
35
Publicité
Chapitres
