Opex Mail Matrix Manuel De L'opérateur page 188

2. Place the defective iBOT into position in the middle of the inner container
as shown in Figure 77.
3. Close up the inner container, then tape the top where the folds meet.
4. Place the inner container back in the shipping box, and send the box back
to OPEX via UPS. The shipping information is already on the box.
94
Place the iBOT so that the sensors are protected by
the indents in the styrofoam.
Figure 77: Place the iBOT into the container
Figure 78: Close the inner container
Mail Matrix Operator Manual
OPEX Corporation
Place tape here