Opex Mail Matrix Manuel De L'opérateur page 302

Feeder Exit Sensor Blocked
Description This jam occurs if the sensor at the exit end of the Auto-Feeder
is found blocked at the start of a run.
Resolution Check the Auto-Feeder to ensure that there isn't any piece in the
feeding mechanism. If there is a piece, perhaps wedged in there as shown in
the picture, remove it.
Figure 131: Mail jamming the feeding mechanism
Feeder Jammed
Description This jam occurs if the sensor at the exit end of the Auto-Feeder
is blocked for an extended length of time.
Resolution Check the Auto-Feeder to ensure that there isn't any piece in the
feeding mechanism. If there is a piece, perhaps wedged in there as shown in
the picture above, remove it.
Mail Matrix Operator Manual
OPEX Corporation
151