Publicité
Load Failure jam
Description
This jam occurs when a piece is not loaded properly on to an
iBOT at the loading position.
Resolution
This can happen due to several reasons including:
• The piece gets skewed in the Input section, and is not able to load up on
the iBOT properly, as shown in the picture.
• The piece may ride up on top of the iBOT's hold-down bar instead of
passing under it, resulting in a jam.
• The piece may catch on something in the Input section and not reach the
iBOT within an expected time-frame, causing a "Load Failure" jam to be
called.
In all these cases, remove the offending piece from the iBOT or the Input
section, and click Start to continue running.
168
Figure 145: Mail loaded crooked on iBOT
Mail Matrix Operator Manual
OPEX Corporation
Publicité
Chapitres
