Publicité
Processing mail
Once you have decided how you want to run your job, it's time to start
processing mail. Below you will find two procedures: the first is for operators
with the basic Mail Matrix configuration, who will key in the recipient and
manually drop mail, the second is for machines with auto-feeder and image
capture/MLOCR options installed.
Basic, Key From Paper mode
The basic, Key From Paper procedure involves the operator identifying the
recipient of each piece and dropping the mail onto the conveyor. This
procedure can be used on any Mail Matrix machine.
1. After selecting the job and choosing the From Paper keying option, press
F12 on the keyboard to switch to the Keying Station application on the Host
PC (or click on the F12 - Switch to Keying button on the bottom of the
Run screen).
56
Figure 34: Run screen
Mail Matrix Operator Manual
OPEX Corporation
Publicité
Chapitres
