Publicité
a. Access the Run screen and select the iBOTs information tab.
b. Select the iBOT you just removed from the list and click the Remove
iBOT(s) button (Figure 70).
c. Click OK when asked if you are sure you want to remove the iBOT, then
click OK to verify that you removed the iBOT.
Inserting iBOTs into the machine
The loading assembly drawer in the bottom of the loading column must be
used to insert iBOTs into the system so that the gears align properly for
tracking purposes. Also, the iBOT Diagnostics screen must always be open
whenever an iBOT is inserted into the machine. This is needed so that the
iBOT can communicate and perform properly within the system.
Figure 70: Run screen iBOT information tab
Mail Matrix Operator Manual
OPEX Corporation
89
Publicité
Chapitres
