Opex Mail Matrix Manuel De L'opérateur page 310

• An iBOT may have collided with a gate that did not fully open or close. The
red ellipse in the picture highlights a gate in such a state. After the collision,
the offending gate will usually finish its movement, so it will look like it is in
proper position. If the jammed iBOT is very close to a gate, and there is no
other obvious source of a collision, the iBOT probably collided with the
gate.
Use the red brake-release button on the iBOT to move the iBOT forward
and backward, and verify that it is moving smoothly without obstruction. If it
is not moving smoothly, the iBOT will need to be removed from the
machine.
Click the Clear Jam button on the Run screen, and click Start to continue
running.
Figure 135: iBOT collided with half-open gate
155
Mail Matrix Operator Manual
OPEX Corporation