GEISMAR PR.2 Notice Originale page 101

STORAGE
• Maintenance
Depending on the product employed, it is desirable or essential to clean the tank after each utilisation.
We recommend that you follow the maintenance instructions given by the manufacturer of the product which you use.
For correct operation of the equipment, all pump seals should always be well greased.
Greasing should be done several times a year and each time a seal is removed or replaced.
A silicone grease should be used.
• Storage
Never leave the equipment in storage under pressure, in sunlight or exposed to heat or cold (T < 0°C).
2
1
Before storage, pull the
pressure release to allow
residual pressure
escape, then
unscrew the pump. The
pump must
unscrewed for storage.
to
slowly
be
Never unscrew A or B
when the tank is under
PRZ_Gb_00993_110725.doc
WARNING
A
B
pressure.