GROLAB USERBOT HW01 Manuel D'installation page 32

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 71
SAFETY INSTRUCTIONS
EN
ES
The following general safety guidelines are provided to help ensure your
The following general safety guidelines are provided to help ensure you
FR
o
own personal safety and protect your device from poten al damage.
•Do not a empt to service the device and never disassemble the device.
•Do not a empt to service the device and never disassemble the device
PT
For some devices with a user-replaceable ba ery, please read and follow
For some devices with a user-replaceable ba ery, please read and follow
t
he instruc ons provided by the installa on manual.
IT
•Keep your device away from radiators and heat sources.
•Keep your device away from extremely hot or cold temperatures to
•Keep your device away from extremely hot or cold temperatures to
ensure that it is used within the specified opera ng range.
e
•Do not spill food or liquids on your device.
•Before you clean your device, disconnect it from the electrical outlet.
•Before you clean your device, disconnect it from the electrical outlet
C
Clean your device with a dry so cloth. Do not use liquids.
•If your device does not operate normally - in par cular, if there are any
•If your device does not operate normally - in par cular, if there are any
unusual sounds or smells coming from it - unplug it immediately and
unusual sounds or smells coming from it - unplug it immediately and
contact an authorized dealer or the Open Grow support center.
c
•To help avoid the poten al hazard of electric shock, do not connect o
•To help avoid the poten al hazard of electric shock, do not connect or
disconnect any cables, or perform maintenance or reconfigura on o
disconnect any cables, or perform maintenance or reconfigura on of
y
your device during an electrical storm.
•Check the voltage ra ng before you connect the device to an electrical
•Check the voltage ra ng before you connect the device to an electrica
outlet to ensure that the required voltage and frequency match the
outlet to ensure that the required voltage and frequency match the
a
available power source.
•Also, ensure that your GroLab modules and a ached devices are
•Also, ensure that your GroLab modules and a ached devices are
electrically rated to operate with the AC power available in your loca on.
electrically rated to operate with the AC power available in your loca on
•Do not plug the power cables into an electrical outlet if the powe
•Do not plug the power cables into an electrical outlet if the power
c
cables are damaged.
•To prevent electric shock, plug the power cables into properly grounded
•To prevent electric shock, plug the power cables into properly grounded
e
electrical outlets.
•If you use an extension power cable, ensure that the total ampere ra ng
•If you use an extension power cable, ensure that the total ampere ra ng
of the devices plugged into the extension power cable does not exceed
of the devices plugged into the extension power cable does not exceed
t
he ampere ra ng of the extension cable.
31
4

Publicité

Table des Matières
loading

Table des Matières