GROLAB USERBOT HW01 Manuel D'installation page 12

Prepare the source code
EN
ES
A er assembling all the sensors and devices,
it is
FR
handle them.
PT
Open Grow provides the base firmware code
IT
in an open-source format. It is available to
download on the GitHub at the following
page:
github.com/OpenWeGrow/UserBot
In this way, the first task is to download the
base code. Since there are several ways to do
it (e.g. using apps to handle repositories or
directly download from the GitHub web
page), we will not detail any specific method
in this manual. However, if you need assistan-
ce, please contact our technical support:
www.opengrow.pt
NOTE: The examples provided by this manual are based on
the code available on August 14, 2019.
11
me to prepare the source code to
support@opengrow.pt
1 11